Viper Replacement Remote Controls

Viper Product Range

Viper Product Range

If you are after a replacement remote for your Viper alarm then I will need to know the Remote Part Number (RPN).  Viper has produced a huge number of remote controls over the years and many look alike. You’ll need the correct one for your alarm system.

I keep most of the current range in stock and should be able to get hold of most older models when required. I also keep a list of old manuals so if you need one for your alarm then let me know.

Viper Remotes NZ

Viper Replacement Remote Controls

All of the ones I keep in stock are listed on the Viper Page of the website with the part numbers next to the photos.

If it is not one listed then here is how to find your remote part number.

Viper Remote RPN#

On the back of the remote, there is normally an FCC ID number. This includes the RPN (Remote Part Number)


It’s either a 3 or 4 digit number. Let me know this or the model of alarm that you have and I’ll do my best to get hold of one for you.

Prices vary so I’ll need to quote for each one. I should also be able to get remote controls for other Directed Electronic systems and the same rules apply.

It’s also worth noting that I keep a Bit Writer. This may be needed to unlock the alarm for programming.


About Julian

Owner and Installer at Obsessive Vehicle Security Limited. More details here... Please keep Comments relevant to the post and use the Contact form for enquiry's
This entry was posted in Alarm Remotes, Viper and tagged , , , , . Bookmark the permalink.

4 Responses to Viper Replacement Remote Controls

  1. Avatar Marina says:

    Hi I have lost the remote for my alarm I do know it’s a viper alarm from the sticker on the car as for the model number I have no idea is there another way to tell the model if the alarm from under the bonnet? Look forward to hearing from you soon

  2. Julian Julian says:

    This post you just commented on explains. Feel welcome to give me a call if you are based in the Wellington region.

  3. Avatar Bill Klaus says:

    Hi – I need a replacement shell for a Viper 7752 remote. Do you have one available?

  4. Julian Julian says:

    The 7752 was not sold in NZ so I don’t stock parts. Contact Directed Electronics for it.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.